Outage Scout Check my area Get the app
Be ready

How to protect your appliances during a brownout

The risky moment in a brownout is when the power comes back. Unplug sensitive electronics, know what a surge protector, AVR and UPS each do, and plug things back one at a time once the power is steady.

The risky part of a brownout for your appliances isn't the power going off. It's the power coming back. Ready.gov warns that power may return with momentary surges or spikes that can cause damage, which is why its first piece of advice is to turn off or disconnect appliances, equipment and electronics.

So the routine is simple: unplug sensitive electronics before a scheduled brownout or as soon as an unscheduled one starts, wait until the power is steady, then plug things back in one at a time. Here's the reasoning, and what surge protectors, AVRs and UPS units can and can't do.

Why the moment the power returns matters

The Electrical Safety Foundation (ESFI) describes a power surge as a sudden, unwanted increase in voltage that can damage, degrade or destroy sensitive electronics. A spike above what a device is designed for can cause an arc of current and heat that damages its parts, and repeated small surges can slowly shorten its life.

Surges have several sources. ESFI notes that they can come from the electric utility during grid switching, and cites an industry estimate that 60 to 80% are created inside a building, for example when large appliances like air conditioners turn on and off. When the power comes back after a brownout, every appliance that was left on starts at the same moment.

BENECO's own advisories add a practical point: the power "may be restored any time", so you can't wait by the switch for it. Unplugging beforehand is what protects you.

What to unplug

  • Computers, laptops and their chargers.
  • TVs, sound systems and game consoles.
  • The modem and router. They're cheap to forget and annoying to replace.
  • Appliances with electronic controls, such as washing machines, microwaves and rice cookers with digital panels.
  • Water pumps and water heaters, or switch off their breakers, so they don't all start together when the power returns.

The Red Cross gives the same advice: unplug appliances and electronics to avoid power overloads or damage from power surges. Leave one ordinary light switched on so you know when the power is back.

Surge protector, AVR or UPS: what each one does

Filipino homes often have an AVR (automatic voltage regulator) next to the TV, computer or fridge. It's worth knowing what it does and doesn't cover.

  • Surge protector. A point-of-use surge protector protects only what's plugged into it, and works by diverting the surge to ground. ESFI recommends one with an indicator light or alarm that tells you when it needs replacing.
  • AVR. An automatic voltage regulator evens out the voltage, stepping it down when it runs too high and up when it sags. It's useful where voltage is unsteady, but it doesn't keep anything running when the power goes.
  • UPS. An uninterruptible power supply has a battery. When the power fails, it keeps a computer or modem running for a while, so you can save your work and shut down properly.
  • Power strip. ESFI is clear: a plain power strip does not provide surge protection. It only gives you more sockets on the same circuit, not more power.

None of them is a guarantee. ESFI notes that no surge protection device can handle a direct lightning strike, and that the best surge protection is to unplug devices from the wall.

Dim lights and low voltage

In the Philippines "brownout" usually means the power is off completely, but sometimes the lights only dim or flicker, or appliances struggle to start. That's low or unsteady voltage. Unplug sensitive electronics until it settles, and if it keeps happening on your street, report it to BENECO through the numbers on its contact page. Some of BENECO's scheduled jobs exist for exactly this; advisories list work such as "Optimization of communal transformer to improve low voltage".

When the power comes back

  1. Wait until it's steady. Give it a few minutes after the lights come back on.
  2. Plug things back one at a time rather than all at once, starting with the essentials.
  3. Give the fridge a moment. If you unplugged or switched off the refrigerator, LG's guidance is to plug it back in after 5 minutes. Check your own model's manual.
  4. Check the breaker panel if part of the house stays dark. If a breaker has tripped, the Red Cross advises having an electrician inspect it before switching it back on.

Mistakes to avoid

  • Trusting a power strip to protect a computer or TV. Unless it's sold as a surge protector, it doesn't.
  • Leaving everything on so that it all starts at once when the power returns.
  • Plugging a generator into a wall socket to power the house. That's dangerous for you and for the line crews; see generator safety during a brownout.
  • Overloading extension cords once the power is back. More sockets don't mean more capacity.

The easiest way to remember to unplug is a reminder before the power goes. Outage Scout (free to download for iPhone and iPad) sends "Starting soon" 2 hours before a scheduled brownout in your saved barangays. For the rest of the night-before routine, see the brownout checklist, or check your barangay now with the barangay check.

Know before the power goes out

Outage Scout puts every BENECO outage on a live map and reminds you the evening before a scheduled brownout in your barangay, then again 2 hours before. Free to download for iPhone and iPad.